5kVA/5kW 48V Hybrid Inverter HYP4850S100-H; Built-in 100A MPPT Solar Charge Controller 5,500Wp/500Voc/120-450V, Parallel up to 6 Units, Wi-Fi/GPRS Compatible

5kVA/5kW 48V Hybrid Inverter HYP4850S100-H

1. Rated Power: 5kVA / 5kW

1. Maximum Power: 10,000VA

1. Nominal Battery Voltage: 48V

1. Battery Voltage Range: 40-60VDC

1. Parallel Capacity: Up to 6 units (for single-phase or three-phase configuration)

1. Cooling Method: Intelligent fan cooling

1. Protection Degree: IP20 (Indoor use only)

1. Weight: 13 kg

Dimensions: 446.9 x 350 x 133 mm

Inverter Output

1. Rated Output Voltage: 230Vac (L/N/PE, Single-Phase)

1. AC Frequency: 50/60Hz

1. Waveform: Pure sine wave

1. Switch Time: 10ms (typical)

1. Load Motor Capacity: 4HP

Maximum Efficiency: 92%

MPPT Solar Charge Controller

1. Maximum PV Input Power: 5,500W

1. Number of MPPTs: 1

1. MPPT Efficiency: 99.9%

1. Maximum PV Open Circuit Voltage (Voc): 500VDC

1. MPPT Voltage Range: 120-450VDC

Maximum PV Input Current: 22A

Battery Charger

1. Maximum Solar Charging Current: 100A

1. Maximum AC Charging Current: 60A

1. Maximum Hybrid Charging Current: 100A

Battery Type Compatibility: Li-ion / Lead-acid / User-defined

Grid/Generator Input
Input Voltage Range: 90-280VDC
Input Frequency Range: 50/60Hz
Bypass Overload Current: 40A
Advanced Features

Supports operation without batteries
Parallel operation up to 6 units for increased capacity and three-phase configuration
Wi-Fi/GPRS remote monitoring (optional external module)
Time-slot function for energy cost optimization
Transformerless topology for improved efficiency and lightweight design
BMS communication support for lithium battery integration
Aesthetic and compact industrial design for easy installation

Safety & Protection
PV overvoltage and current limiting protection
Battery overvoltage and undervoltage protection
AC output overload and short circuit protection
Heat sink over-temperature protection
Reverse polarity protection for PV and battery
Parallel connection error protection
Synchronization signal protection in parallel mode
Certifications
EN61000 / FCC Part15 ClassB / IEC 62109 / IEC 62477 / IEC 62040 / UKCA / PSE